Dry mortar valve bag Airpacker, 20 – 50kg +/-0.5 to 1.0%
Specially designed for filling dry mortar or highly abrasive sand based cementitious products. Air Packers uses pneumatic aeration to fluidize the product and induce flow into the bag, there is mechanical no moving parts in contact with product. Aeration is achieved via a low-pressure high-volume blower package.

Dry premix powder impeller packer, 20 – 50kg +/-0.25 to 0.5%
Suitable for filling powder material, Impeller Packers are designed with a set of rotating blades to sweep materials into bags. Feed augers ensure the blades are fully flooded with material and fill consistently. Usually, the fill nozzle are provided with small aeration hole to help fluidise the material and ensure flow.

Open mouth bag filler, 10 to 50kg +/- 0.25 to 0.5%
Designed to fill open mouth type bags, boxes or drums with dry, flaked, granular or powdered products. Product is fed by a twin auger feeder into an open mouth bag which hangs on a “weighed” frame supported on load cell. As the bag weight increases, the auger switches speed from fast to slow until the final weight is registered. The bag will then be released and move to the heat sealing or bag sewing section.

Bulk bag filler, 500- 1000kg +/-0.25 to 1%
Designed as either gross weight or net weight machines to fill open mouth bulk bags, tote boxes and drums with dry pelleted, flaked, granular or powdered products This modular design is configurable to fit any application from manual basic bagging lines to a fully automated system that dispenses the empty pallet, fills the bag to the correct weight, discharges the filled bag and roll out the filled bag to storage area.